Connect with your social network account

[backlash]

can i glue vinyl straight to the foam head liner after sanding and cleaning it? any info will be appreciated thanks

[John]

You can but it probably wont look very smooth if your using vinyl. I would first glue down a layer of 1/4 inch foam or 1/8 inch closed cell foam. Depending on the finish your looking for. Closed cell is firmer and personally that's what I would use.

If you use closed cell make sure you lightly sand the skin off with 120 grit paper before you glue it on.

[Revv Up]

I just went through this and had to tear my work off and get a layer of 1/4 foam on, I wasted a lot of time and material learning that lesson.

[BigRig]

I have actually become a little worried about spraying my adhesive onto form then laying the vinyl down. I see how quickly you can get a little wave and it looksl ike John sain not very smooth.

[John]

I just went through this and had to tear my work off and get a layer of 1/4 foam on, I wasted a lot of time and material learning that lesson.

Yup unfortunately sometimes mistakes like that is how we get better at the trade. Ive had to re-do lots of things along the way.