• User avatar
  • User avatar
User avatar
By katdomen12@gmail.com
#15742
Hello. I've been asked by my fitness center to reupholster a couple pieces of fitness equipment padding. The ends of the padding are stapled to a thin wooden ring. The dimensions of the ring is 3.25" diameter, the hole opening is 2" diameter, the width of the ring 5/8" (maybe 1/2") and the thickness is 1/8".

Below are images of the fitness equipment padding, the wooden rings and how they are used:

Image
Image
Image
Image

Does anyone know where I can get these rings?

Thank you.
Attachments
IMG_6614.png
IMG_6614.png (1.4 MiB) Viewed 633 times
User avatar
By LLeeT
#15743
Hole saw should be okay for those. 3 1/4" may be hard to find. 3 1/2" should be easy enough to sand to 3 1/4. 2" would be no problem. The ring is 5/8" for sure.
Hope that helps.

I agree it's usually not a problem but on occasion[…]

Single Faced Basting Tape

Thanks Ron. I was watching a video from Cechaflo […]

Do you have a picture of the corner? Trying to und[…]

The Padded Cell

nice job! :grin: