• User avatar
  • User avatar
User avatar
By JimmieJoe
#15491
Is it possible to change a fully enclosed armrest from edge bead to top stitch? I just simulating sew this but it seems like due to the geometry that it get hung up on the machine. I know that newer armrest are only half upholstery and half shell, so topstitching is no issue.
Attachments
7A766BFB-DBA2-4613-BD96-916DEFA9C214.jpeg
7A766BFB-DBA2-4613-BD96-916DEFA9C214.jpeg (1.36 MiB) Viewed 647 times
1965E164-90D9-4B01-B148-E442CB3C2B80.jpeg
1965E164-90D9-4B01-B148-E442CB3C2B80.jpeg (1.33 MiB) Viewed 647 times
A3CA0FFA-0215-492D-9ADD-6042823C4D3F.jpeg
A3CA0FFA-0215-492D-9ADD-6042823C4D3F.jpeg (1.1 MiB) Viewed 647 times
User avatar
By BigRig
#15498
@JimmieJoe , you sure can same seam allowance and everything just top stitch it up and NOT if you want a classic look.

With a vision to empower and inspire our customers[…]

First Project - Cube Stool

Sleek contemporary furniture combined with a neutr[…]

I agree it's usually not a problem but on occasion[…]

Single Faced Basting Tape

Thanks Ron. I was watching a video from Cechaflo […]