Anything about sewing machines and the tools we use.
  • User avatar
  • User avatar
By UpStater
#11750
I need the hinges that bolt to the Juki base and then lock into the table to allow the unit to pivot. Not sure what they are called, if they are universal and where to purchase a set.


Also....what is the purpose of the lever on the bobbin threading attachment?

Thanks
Attachments
IMG_1278.JPG
IMG_1278.JPG (154.27 KiB) Viewed 2008 times
IMG_1277.JPG
IMG_1277.JPG (48.32 KiB) Viewed 2008 times
#11755
The lever looks like it may be an forward and aft adjustment lever. Loosen the two mounting screws and see if the lever moves the assembly forward and back. I can't tell from the pic but you want it adjusted so the wheel is touching the belt when engaged and not touching the belt when the full bobbin trips it to release.

With a vision to empower and inspire our customers[…]

First Project - Cube Stool

Sleek contemporary furniture combined with a neutr[…]

I agree it's usually not a problem but on occasion[…]

Single Faced Basting Tape

Thanks Ron. I was watching a video from Cechaflo […]